Here are some answers to some frequently asked questions:
- Adjust the diaper sizing by choosing the right snap setting on the front of the diaper.
- Your diaper arrives snapped down to the "small" setting, the bottom row of snaps.
- To use the "medium" setting, unsnap the diaper and resnap on the second row of snaps.
- To use the diaper on the "large" setting, fully unsnap the front of the diaper.
HELPFUL HINT: For overnight use, consider stuffing with two inserts and setting the diaper to be one size larger than you would for daytime use.
- Adjust the insert sizing by choosing the right snap setting on the insert.
- To use the insert as a "small", snap the insert down to the bottom snap socket. Little boys tend to do well with the folded part towards the front of the diaper while little girls may do better with it towards the back.
- To use the insert as a "medium", snap the insert down to the middle snap socket.
- To use the insert as a "large", just leave it completely unsnapped.
- Put the insert in your diaper. Hold the insert in one hand and place inside the slot (located under the protective flap). Align the front edge of the insert with the top edge of the velcro strip. Using one hand to hold the front of the insert in place, stretch the diaper and smooth the insert flat as you pull your other hand out of the diaper.
HELPFUL HINT: Many parents prefer to pre-stuff their diapers at the end of their washing routine.
- Put the diaper on your baby. bumGenius One-Size Cloth Diapers go on just like a disposable diaper.
- For bumGenius 3.0 and 2.0 products (made with PUL outer):
- Wash once in cold water with no more than 1/4 (high efficiency machines) to 1/2 (top loading, regular machines) of the detergent's recommened amount per load.
- Wash once in hot (up to 120 degrees) water with no more than 1/4 (high efficiency machines) to 1/2 (top loading, regular machines) of the detergent's recommened amount per load. Optionally (and only occasionally), add 1/4 cup of bleach to this cycle.
- Add an extra rinse to remove any lingering detergent in the diapers.
- Tumble dry on the warm setting.
- What detergent can I use?
You should only use detergents that are free of dyes, enzymes, perfumes, whiteners and brighteners. Using detergents containing these ingredients will cause damage to your diaper including elastic failure and leaking.
- What should I avoid?
Do not use extra additives in your wash (like baking soda or vinegar). These ingredients are unnecessary and will cause problems in your diapers. Do not use fabric softeners.
- Did you prewash?
First of all, make sure that you washed everything at least once before using. There can be residue left on the fabric from the production process that can cause leakage.
- Is the insert flat?
Make sure that the insert is FLAT when you put the diaper on your baby. If it is twisted or wadded up, this can cause leakage. If your baby's build causes the insert to bunch up, consider using a Hemp Diaper Doubler on top of your insert. This helps to prevent the wadding that can occur with some builds.
- Is the wetness at the top edge of the diaper?
This issue has been resolved with the new bumGenius 3.0 One-Size diapers. Our unique extra layer of waterproof material across the inside front of the diaper prevents leaking at the top of the diaper. bumGenius 3.0 One-Size diapers are the first and only diapers with this innovative feature. If you have bumGenius 2.0 One-Size diapers and the wetness is at the top edge of the diaper, make sure that the insert isn’t pushing the lining fabric up against your baby’s clothing. The insert should be placed approximately one inch below the top edge of the diaper. The top edge of the diaper should be flat against your baby with the soft fabric against your baby’s belly.
- Wash once in hot water with one teaspoon (for high efficiency machines) to one tablespoon (for regular washing machines) with original liquid Dawn (blue formula) and up to 1/2 cup bleach in the wash cycle.
- Provide you with simple instructions for repairing the product or resolving the problem you are having with the diaper.
- The washing instructions have not been followed.
- The diaper has been altered.
- Any of the following has been used in conjunction with the use/care of the product:
- Water temperatures exceeding 150F or 60C
- A detergent containing additives (enzymes, brighteners, whiteners, dyes, perfumes, essential oils) or natural soap